Junker JH23UA 0 Series, Инструкция по эксплуатации

Страница: 41 / 72

41
3.
Press the 0 clock button.
The x Cooking time symbol flashes.
4.
Use the + or - button to set the cooking time.
5.
Press the 0 Clock button repeatedly until the y End time
symbol flashes.
You can see in the display when the meal will be ready.
6.
Use the + button to set a later end time.
The setting is adopted after a few seconds.
The display shows the end time until the oven starts
operating.
The cooking time has elapsed
A signal sounds. The oven switches off. Press the
0
button
twice and switch off the function selector.
Note:
You can make changes as long as the symbol is
flashing. When the symbol lights up, the setting has been
adopted.
Setting the time
Following a power cut or when the oven is used for the first
time, the
0
symbol and three zeros flash in the display. Set the
time. The function selector must be switched off.
Setting procedure
1.
Press the
0
clock button.
12.00 appears and the
0
symbol flashes.
2.
Use the + and - buttons to set the time.
After a few seconds, the time is accepted. The
0
symbol
goes out.
Changing from summer to winter time.
Press the
0
clock button twice and use the + or - buttons to
change the time.
Setting the timer.
You can use the timer as a normal kitchen timer. It operates
independently of the oven. The timer has a specific signal. This
informs you when the timer or cooking time has elapsed. You
can also set the timer if the childproof lock is active.
Setting procedure
1.
Press the
S
timer button.
The
S
symbol flashes.
2.
Use the + or - buttons to set the timer time.
Default value for = 10 minutes
Default value for button - = 5 minutes
The timer starts after a few seconds. The
S
symbol is lit in the
display. The time counts down in the display.
The time has elapsed
A signal sounds. Press the
S
timer button. The timer display
goes out.
Changing the alarm time
Press the
S
timer button. Use the + or - buttons to change the
time.
Delete the setting
Press the
S
timer button. Press the - button until zeros appear
in the display.
The timer and the cooking time run down in synchronisation
The symbols are lit. The timer time counts down in the display.
Check the remaining
x
cooking time,
y
end time or
0
time
of day:
Press the
0
clock button repeatedly until the relevant symbol
is displayed.
The requested value appears in the display for several
seconds.
NJ
PLQ
K
NJ
PLQ
K