Page 3
Task 4: Ensure That the Services Gateway Acquires an IP Address
Use one of the following methods to obtain an IP address for the services gateway:
Method 1: Obtaining a Dynamic IP Address on Your Services Gateway
Use the port labeled
0/0
(interface ge-0/0/0) to connect to your Internet Service
Provider (ISP). Your ISP assigns an IP address to the services gateway using the
DHCP process.
If you use this method, skip Task 6, and go to Task 7.
Method 2: Obtaining a Static IP Address on Your Services Gateway
Use the port labeled
0/0
(interface ge-0/0/0) to connect to your ISP. Your ISP will
have provided a static IP address. You must configure the static IP address on the
services gateway as described in Task 6, Steps 1 through 4. If you use this method,
the services gateway will not receive an IP address using the DHCP process.
Task 5: Access the J-Web Interface
1.
Launch a Web browser from the management device.
2.
Enter
http://192.168.1.1
as the browser address. The J-Web login page appears.
3.
Specify the default username as
root
. Do not enter any value in the Password field.
4.
Click
Log In
. The first time you log in, the J-Web Initial Setup page appears.
5.
To begin configuring your services gateway, click the
Start
button in the lower right
corner of the page and continue to configure your service gateway.
Task 6: Configure the Basic Settings
Configure the basic settings, such as hostname, domain name, and root password, for
your services gateway.
IMPORTANT:
Ensure that you have configured the IP address, root authentication, and
default gateway before you apply the configuration.
NOTE:
All fields marked with an asterisk (*) are mandatory.
All network and management access settings are optional.
If you have followed Method 1 of Task 4 (Obtaining a Dynamic IP Address on Your
Services Gateway), skip all the other steps and go to Task 7.
If you have followed Method 2 of Task 4 (Obtaining a Static IP Address on Your Services
Gateway), ensure that you make the following J-Web modifications:
1.
On the Configure System: Network Settings page of the Juniper Setup Wizard-SRX
Series, enter the IP address of the device that connects your device with WAN
(service provider) in the Default Gateway field, and enter server names in the DNS
Name Servers list. Your ISP provides the IP address for the gateway and the server
names. Click
Next
to continue.
2.
On the Configure Interfaces page of the wizard, select the
ge-0/0/0.0
interface and
click
Edit
.
3.
On the Add/Edit interface page, next to Address, clear
DHCP
and select
IP
Address
.
4.
In the IP Address/subnet field, enter the IP address provided by your ISP. Enter the
IP address in the format
a.b.c.d/xx
, where
xx
is the subnet prefix.
NOTE:
To allow the required inbound services and protocols to be terminated on the
services gateway, make sure you have selected the required services and protocols
under
Services (Inbound)
and
Protocols (Inbound)
. Select
all
to permit all protocols
and services.
You can use the Configure J-Web Preferences page of the wizard to set the J-Web
starting page options and J-Web commit options.
