Juniper SRX100B, Руководство по оборудованию, Страница: 94 / 172

7.
Start your asynchronous terminal emulation application (such as Microsoft Windows
HyperTerminal) and select the appropriate
COM
port to use (for example,
COM1
).
8.
Configure the port settings shown in Table 29 on page 76 .
Table 29: Console Port Settings for the SRX100 Services Gateway
Value Port Settings
9600 Bits per second
8 Data bits
None Parity
1 Stop bits
None Flow control
9.
Power on the services gateway by pressing the Power button on the front panel. Verify
that the
Power LED on the front panel turns green.
The terminal emulation screen on your management device displays the startup
sequence. When the services gateway has finished starting up, a login prompt appears.
10.
Log in as the user
root
. No password is required at initial connection, but you must
assign a root password before committing any configuration settings.
Related
Documentation
SRX100 Services Gateway Basic Connectivity Overview
•
•
Connecting to the SRX100 Services Gateway Setup Wizard on page 73
•
Connecting an SRX100 Services Gateway to the CLI Remotely on page 76
•
Displaying Basic Connectivity Configurations for the SRX100 Services Gateway
•
Connecting the Modem at the SRX100 Services Gateway End on page 62
Connecting an SRX100 Services Gateway to the CLI Remotely
You can connect an SRX100 Services Gateway to the CLI from a remote location through
two dial-up modems:
• A modem that is connected to the console port on the services gateway
• A second modem connected to a remote management device
The modem connection allows you to remotely perform the same console operations
you can perform locally.
Related
Documentation
SRX100 Services Gateway Basic Connectivity Overview
•
•
Connecting to the SRX100 Services Gateway Setup Wizard on page 73
•
Connecting an SRX100 Services Gateway to the CLI Locally on page 75
Copyright © 2015, Juniper Networks, Inc. 76
SRX100 Services Gateway Hardware Guide for B and H Model Numbers