
Installing the Wi-Fi Mini-PIM in an SRX Series Services
Gateway
You can install the Mini-PIM in any of the Mini-PIM slots on the services gateway.
NOTE:
You can install only one Wi-Fi Mini-PIM in a services gateway.
To install the Mini-PIM in a services gateway:
1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to the grounding
point on the back of the services gateway.
2. Power off the services gateway by briefly pressing the Power button on the front panel. Wait for the Power LED to
turn off before proceeding. Disconnect the services gateway from the power source.
3. Slide the Mini-PIM in the slot until it lodges firmly in the services gateway. Tighten the screws on each side of the
Mini-PIM faceplate. See
Figure 2: Installing the Wi-Fi Mini-PIM
g022546
4. Attach the antennas to the front panel of the Mini-PIM. You can attach the antenna by using one of the following
methods:
•
Direct mounting—Attach the antennas to the RP-SMA connectors on the front panel (see
).
20