
For products available in the USA/Canada markets, only channels 1–11 can be operated. Selection of other channels is
not possible.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20 cm between the radiator and your body.
This module is intended for OEM integrator. This module is only FCC authorized for the specific rule parts listed on the
grant, and that the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host
not covered by the modular transmitter grant of certification. The final host product still requires Part 15 Subpart B
compliance testing with the modular transmitter installed. Additional testing and certification may be necessary when
multiple modules are used.
Users Manual of the End Product
In the users manual of the end product, the end user has to be informed to keep at least 20 cm separation with the antenna
while this end product is installed and operated. The end user has to be informed that the FCC radio-frequency exposure
guidelines for an uncontrolled environment can be satisfied.
The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could
void the user's authority to operate this equipment.
This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference and (2) this device must accept any interference received, including interference that may
cause undesired operation.
Label of the End Product
The final end product must be labeled in a visible area with the following " Contains TX FCC ID: QZEMPWAPUS ".
This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference and (2) this device must accept any interference received, including interference that may
cause undesired operation.
34