Juniper QFX5220, Руководство по оборудованию, Страница: 96 / 247

Table 34: Cable Specifications for Console and Management Connections for the QFX Series (continued)
Device
Receptacle
Maximum
Length Cable Supplied Cable Specification
Port on QFX
Series Device
RJ-45 328 feet
(100 meters)
One 7-foot (2.13-meter) long
RJ-45 patch cable
Category 5 cable or
equivalent suitable for
1000BASE-T operation
Management port
RJ-45 Management Port Connector Pinout Information
Table 35 on page 99 provides the pinout information for the RJ-45 connector for the management port
on Juniper Networks devices.
Table 35: RJ-45 Management Port Connector Pinout Information
Description Signal Pin
Transmit/receive data pair 1 TRP1+ 1
Transmit/receive data pair 1 TRP1— 2
Transmit/receive data pair 2 TRP2+ 3
Transmit/receive data pair 3 TRP3+ 4
Transmit/receive data pair 3 TRP3— 5
Transmit/receive data pair 2 TRP2— 6
Transmit/receive data pair 4 TRP4+ 7
Transmit/receive data pair 4 TRP4— 8
Console Port Connector Pinouts for the QFX Series
The console port (labeled CON, or CONSOLE) is an RS-232 serial interface that uses an RJ-45 connector
to connect to a console management device. The default baud rate for the console port is 9600 baud.
99