Juniper QFX5100, Руководство по оборудованию

Страница: 57 / 256

Figure 25: DC Power Supply Faceplate in QFX5100 Switches
5
5— 1— ESD grounding point Feed B input terminals
6— 2— Fault LED Feed A input terminals
7— 3— Output LED Terminal block
8— 4— Input LED Ejector lever
To avoid electrical injury, carefully follow instructions in “Installing a Power Supply in a
QFX5100 Switch” on page 194 and “Removing a Power Supply from a QFX5100 Switch”
on page 196 .
Related
Documentation
DC Power Supply LEDs on a QFX5100 Switch on page 221
•
•
Management Panel of a QFX5100 Switch on page 14
•
Field-Replaceable Units in a QFX5100 Switch on page 8
•
DC Power Specifications for a QFX5100 Switch on page 99
•
Prevention of Electrostatic Discharge Damage on page 142
•
Connecting DC Power to a QFX5100 Switch on page 176
Grounding Cable and Lug Specifications for a QFX5100 Switch
For installations that require a separate grounding conductor to the chassis, the switch
must be adequately grounded before power is connected to ensure proper operation
and to meet safety and electromagnetic interference (EMI) requirements. To ground a
QFX5100 switch, connect a grounding cable to earth ground and then attach it to the
chassis grounding points.
39 Copyright © 2014, Juniper Networks, Inc.
Chapter 5: Power Supply