Juniper PTX3000, Быстрый старт, Страница: 13 / 37

3.
Connect the grounding cable to a proper earth ground.
4.
Verify that a licensed electrician has attached the cable lug provided with the packet
transport router to the grounding cable.
5.
Ensure that grounding surfaces are clean and brought to a bright finish before you
connect the grounding cable.
6.
Place the grounding cable lug over the grounding points ( Figure 7 on page 13 ).
7.
Secure the grounding cable lug to the grounding points, first with the washers, then
with the acorn nuts.
8.
Verify that the grounding cabling is correct, that the grounding cable does not touch
or block access to the packet transport router components, and that it does not drape
where people could trip on it.
Figure 7: Connecting the Grounding Cable
g0
0
7
5
0
7
13 Copyright © 2014, Juniper Networks, Inc.
Step 5: Connect the PTX3000 Packet Transport Router Grounding Cable