Quick Start Guide
PTX Optical Inline Amplifier
IN THIS GUIDE
Step 1: Begin
IN THIS SECTION
Connect Power to the Optical ILA | 3
To install and configure a Juniper Networks Optical Inline Amplifier, you need:
•
Electrostatic discharge (ESD) grounding strap (not provided)
•
Four screws to secure the chassis and mounting brackets to the rack (not provided)
•
Screwdriver appropriate for the rack-mounting screws (not provided)
•
Two power cords with plugs appropriate for your geographical location (provided with the AC model)
•
Two DC power connectors (provided with the DC model)
•
Power cable or cables appropriate for your geographical location available to connect DC power to the optical ILA (not
provided)
•
RJ-45 cable and RJ-45 to DB-9 serial port adapter (provided)
•
Management host, such as a PC laptop, with a serial port (not provided)