Juniper NSM4000, Руководство по оборудованию

Страница: 188 / 196

•
EN 61000-4-4 EFT
• EN 61000-4-5 Surge
• EN 61000-4-6 Low Frequency Common Immunity
•
EN 61000-4-11 Voltage Dips and Sags
Related
Documentation
Compliance Statements for EMC Requirements for the NSM4000 Appliance on page 174
•
•
Compliance Statements for Acoustic Noise for the NSM4000 Appliance on page 176
Compliance Statements for EMC Requirements for the NSM4000 Appliance
This topic describes the electromagnetic compatibility (EMC) requirements for the
NSM4000 appliance:
•
Canada on page 174
• European Community on page 175
• Japan on page 175
•
Korea on page 175
•
United States on page 175
• FCC Part 15 Statement on page 176
Canada
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
The Industry Canada label identifies certified equipment. This certification means that
the equipment meets certain telecommunications network protective, operational, and
safety requirements. Industry Canada does not guarantee the equipment will operate to
the users’ satisfaction.
Before installing this equipment, users should ensure that it is permissible to connect the
equipment to the facilities of the local telecommunications company. The equipment
must also be installed using an acceptable method of connection. In some cases, the
inside wiring associated with a single line individual service can be extended by means
of a certified connector assembly. The customer should be aware that compliance with
the above conditions might not prevent degradation of service in some situations.
Repairs to certified equipment should be made by an authorized Canadian maintenance
facility designated by the supplier. Any repairs or alterations made by the user to this
equipment, or equipment malfunctions, might give the telecommunications company
cause to request the user to disconnect the equipment.
Copyright © 2016, Juniper Networks, Inc. 174
NSM4000 Appliance Hardware Guide