Juniper MX2010, Руководство по оборудованию

Страница: 669 / 825

Maintaining MX2010 MPCs
Purpose
The router can have up to 10 Modular Port Concentrators (MPCs) mounted vertically in the MPC card
cage at the front of the chassis. For optimum router performance, verify the condition of the MPCs.
Action
On a regular basis:
•
Check the LEDs on the craft interface directly above each MPC slot. The green LED labeled OK lights
steadily when a MPC is functioning normally.
•
Check the OK/FAIL LED on the MPC. For more information, see MX Series Interface Module Reference .
If the MPC detects a failure, the MPC sends an alarm message to the Routing Engine.
•
Check the status of installed MPCs by issuing the CLI show chassis fpc command to check the status of
installed MPCs. As shown in the sample output, the value Online in the column labeled State indicates
that the MPC is functioning normally:
user@host>
show chassis fpc
Temp CPU Utilization (%) Memory Utilization (%)
Slot State (C) Total Interrupt DRAM (MB) Heap Buffer
0 Online 59 13 0 2048 16 14
1 Online 59 13 0 2048 16 14
2 Online 58 14 0 2048 17 14
3 Online 58 18 0 2048 17 14
4 Online 58 13 0 2048 16 14
5 Online 61 10 0 2048 18 13
6 Online 62 10 0 2048 18 13
7 Online 61 9 0 2048 18 13
8 Online 61 10 0 2048 18 13
9 Online 60 9 0 2048 11 13
For more detailed output, add the detail option. The following example does not specify a slot number,
which is optional:
user@host>
show chassis fpc detail
Slot 0 information:
State Online
Temperature 29
Total CPU DRAM 2048 MB
Total RLDRAM 403 MB
Total DDR DRAM 1572 MB
653