Juniper MX10016, Руководство по оборудованию

Страница: 252 / 320

Locating the Serial Number on an MX10016 Router or Component
IN THIS SECTION
Listing the Chassis and Component Details Using the CLI | 255
Locating the Chassis Serial Number ID Label on an MX10016 | 258
Locating the Serial Number ID Labels on the Power Supplies | 259
Locating the Serial Number ID Labels on Fan Trays and Fan Tray Controllers | 261
Locating the Serial Number ID Labels on Routing and Control Boards | 261
Locating the Serial Number ID Labels on a Line Card | 262
Locating the Serial Number ID Labels on a Switch Fabric Board (SFB) | 262
If you are returning a router or component to Juniper Networks for repair or replacement, you must locate
the serial number of the router or component. You must provide the serial number to the Juniper Networks
Technical Assistance Center (JTAC) when you contact them to obtain a Return Materials Authorization
(RMA). See “Contacting Customer Support to Obtain a Return Materials Authorization for an MX10016
Router or Component” on page 263 .
If the router is operational and you can access the command-line interface (CLI), you can list serial numbers
for the router and for some components with a CLI command. If you do not have access to the CLI or if
the serial number for the component does not appear in the command output, you can locate the serial
number ID label on the router or component.
NOTE: If you want to find the serial number ID label on a component, you need to remove the
component from the router chassis, for which you must have the required parts and tools available.
Listing the Chassis and Component Details Using the CLI
To list the MX10016 chassis and the components and their serial numbers, use the show chassis hardware
CLI operational mode command.
user@device> show chassis hardware
255