route on the dialer interface by using the set interfaces dl0 unit 0 dialer-options route destination-ip-address
command.
After you configure a static route, make sure that the route appears in the routing table of the device by
using the show route command. Note that the static route appears in the routing table only after the LTE
Mini-PIM is connected to the network.
Sample output:
user@host> show route
inet.0: 10 destinations, 10 routes (10 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
0.0.0.0/0 *[Access-internal/12] 4d 03:23:52, metric2 0
> to 10.14.5.137 via dl0.0
10.22.22.22/32 *[Access-internal/12] 00:01:03, metric2 0
> to 10.14.5.137 via dl0.0
16
