Juniper LN1000-V, Руководство по оборудованию

Страница: 47 / 56

CHAPTER 10
Installing the LN1000–V Rear Transition
Module
• Installing the LN1000–V Rear Transition Module on page 29
• Installing an SFP Transceiver in an LN1000–V RTM on page 30
•
Removing an SFP from an LN1000–V RTM on page 32
•
LN1000–V Rear Transition Module Front Panel Status LEDs on page 33
Installing the LN1000–V Rear Transition Module
To install the LN1000-V rear transition module into a VITA 46.0-compliant chassis:
1.
Verify that you have taken the necessary antistatic precautions.
2.
On the back of the VITA 46.0-compliant chassis, choose an appropriate slot for the
rear transition module.
The LN1000-V rear transition module must be installed inline behind the designated
location where you plan to install the LN1000-V router. For example, if the LN1000-V
router is to be installed in slot 3, the rear transition module must be installed in the
back of the chassis in slot 3.
29 Copyright © 2010, Juniper Networks, Inc.