manualshive.com logo in svg

Juniper JUNOSe 11.1, Руководство по настройке

Juniper JUNOSe 11.1 - Конфигурационное руководство для управления вашим сетевым оборудованием. Бесплатно загрузите это руководство с сайта manualshive.com и настройте вашу сеть с уверенностью. Обновленные инструкции помогут вам использовать все возможности продукта для оптимальной производительности вашей сети.

Поделиться
Скачать
background image

with unused sectors. If the utility cannot correct a corrupt sector, it marks the
sectors so that they cannot be reused. Errors in the boot block, FAT, or root
directory are fatal and cannot be corrected by the scan utility.

■

In a router that contains two SRP modules, if the scanning utility detects corrupt
sectors in flash on the primary SRP module during rebooting, the primary SRP
module reboots again. Both SRP modules now have standby status and reboot.
The first SRP module to complete rebooting becomes the primary. Because the
former redundant module started to reboot first, it likely becomes the primary.
When the former primary module has rebooted and the scan utility has fixed
corrupt sectors in its flash card, the SRP modules will synchronize. Any files or
directories removed by the scan utility are restored during the synchronization.

■

If you reboot the router before it has completely written configuration updates
to the flash card, the router starts with the last saved configuration. If you reboot
the router after it has written the configuration updates to the flash card, but
before it has applied those updates to actual configuration data, the configuration
update process resumes immediately following the reboot and is completed
before any application accesses its configuration data.

Flash Features on the E120 Router and the E320 Router

The E120 and E320 routers can have a second flash card installed with its SRP
modules. Device names are reserved for the E120 and E320 routers flash card slots:
disk0, disk1, standby-disk0, and standby-disk1. For backward compatibility, you can
use the name standby, which is equivalent to standby-disk0. You can use the second
card (disk1 or standby-disk1) only for storage of core dump (.dmp) files. When the
a card is installed and mounted as disk1 or standby-disk1, all .dmp files are
automatically stored on this card. You must use the card mounted as disk0 or
standby-disk0 for all other file types. Core dump files are stored on disk0 or
standby-disk0 only when a second card is not installed.

The 

copy

, 

dir

, 

delete

, and 

rename

 commands all recognize the device names, as in

the following examples. Disk1 and standby-disk1 accept only dump files. This means
that you can copy only .dmp files to the second disk, delete only .dmp files from the
second disk, and rename only .dmp files on the second disk.

host1#

copy reset05.dmp server2:reset05.dmp

host1#

copy disk0:051802.dmp server2:reset05.dmp

host1#

delete disk1:reset05.dmp

host1#

delete standby:reset05.dmp

host1#

delete standby-disk0:reset05.dmp

host1#

delete standby-disk1:reset05.dmp

host1#

rename standby-disk1:foo.dmp standby-disk1:bar.dmp

host1#

rename foo.dmp /outgoing/bar.dmp

host1#

dir

Please wait...
active/standby file systems are synchronized
   unshared                                                             in
     file                   size         size         date (UTC)        use
--------------            ---------    --------   -------------------   ---
disk0:reboot.hty             654336      654336   03/01/2005 16:08:28
disk0:system.log               3644        3644   11/30/2004 20:48:18
disk0:special.rel         159256660    61695156   02/18/2005 10:31:48
disk0:lm4_12.dmp          344200394   344200394   02/12/2005 12:12:12
standby-disk0:lm4_13.dmp  344200394   344200394   02/13/2005 13:13:13

Managing Flash Cards on SRP Modules

■

379

Chapter 6: Managing Modules

Содержание JUNOSe 11.1

































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для JUNOSe 11.1

NEC AccuSync LCD52V White Paper preview
AccuSync LCD52V
Бренд: NEC Страницы: 5
Waves Software Audio Processor DLA User Manual preview
Software Audio Processor DLA
Бренд: Waves Страницы: 6
Olympus CAMEDIA Master Software Installation Manual preview
CAMEDIA Master
Бренд: Olympus Страницы: 2
Toshiba Strata CTX ACD Application Manual preview
Strata CTX ACD Application
Бренд: Toshiba Страницы: 1
Toshiba Strata CIX WinCIX Technical Bulletin preview
Strata CIX WinCIX
Бренд: Toshiba Страницы: 5
Toshiba Strata CIX SoftIPT 2.1.2 Product Bulletin preview
Strata CIX SoftIPT 2.1.2
Бренд: Toshiba Страницы: 5
Toshiba Strata CS Release 7.0 Sales Bulletin preview
Strata CS Release 7.0
Бренд: Toshiba Страницы: 8
Toshiba Strata CIX SoftIPT 2.2 Product Bulletin preview
Strata CIX SoftIPT 2.2
Бренд: Toshiba Страницы: 10
Toshiba Strata CTX SoftIPT Technical Bulletin preview
Strata CTX SoftIPT
Бренд: Toshiba Страницы: 12
Toshiba Strata CIX Database Assistant Technical Bulletin preview
Strata CIX Database Assistant
Бренд: Toshiba Страницы: 7
Toshiba Strata CIX SIP Trunking Product Bulletin preview
Strata CIX SIP Trunking
Бренд: Toshiba Страницы: 14
Toshiba STRATA CIX Net Server Administrator'S Manual preview
STRATA CIX Net Server
Бренд: Toshiba Страницы: 14
Toshiba IPedge R1.5 Product Bulletin preview
IPedge R1.5
Бренд: Toshiba Страницы: 16
Toshiba HDTC605XG3A1 User Manual preview
HDTC605XG3A1
Бренд: Toshiba Страницы: 16
Toshiba T-PSV Operation Manual preview
T-PSV
Бренд: Toshiba Страницы: 38
Toshiba STRATA CIX Net Server Installation Manual preview
STRATA CIX Net Server
Бренд: Toshiba Страницы: 30
Toshiba FlashAir User Manual preview
FlashAir
Бренд: Toshiba Страницы: 29
Toshiba STRATA CIX Effective Call Center Management Installation Manual preview
STRATA CIX Effective Call Center Management
Бренд: Toshiba Страницы: 42

Бренды по названию

Популярные бренды

Загрузить еще бренды