Juniper Junos Space JA1500, Руководство по оборудованию

Страница: 73 / 210

h.
Perform one of the following actions depending on whether you are upgrading
Junos Space Platform on the node or configuring a fresh Junos Space node.
• Type Y to restore backed up data if you are upgrading Junos Space Platform.
A message is displayed, warning you to wait till the backed up data is
completely restored and all required Junos Space services are started on the
node before attempting to access the Web GUI.
The Settings Summary is displayed, as shown in the following example:
Settings Summary:
> IPv4 Change: eth0 is 192.168.26.151 / 255.255.254.0
> Default IPv4 Gateway = 192.168.27.10 on eth0
> IPV6 Change: eth0 is 2001:db8:85a3:0:0:8a2e:c0a9:1b37 / 64
> Default IPv6 Gateway = 2001:db8:85a3:0:0:8a2e:c0a9:1bbd on eth0
> IPv4 DNS add: 192.168.27.2
> DNS add: 2001:db8:85a3:0:0:8a2e:c0a9:1bbd
> Create as first node or standalone
> Web IPv4 address 192.168.26.152
> Web IPv6 address is 2001:db8:85a3:0:0:8a2e:c0a9:1b38/64
> NTP add: device1.example.com
> NAT IPv4 Outbound SSH IP: 192.168.130.2
> NAT IPv4 Outbound SSH Port: 5051
> NAT IPv4 Trap IP: 192.168.130.2
> NAT IPv4 Trap Port: 5052
> NAT IPv6 Outbound SSH IP: 2001:db8:85a3:0:0:130:0:2
> NAT IPv6 Outbound SSH Port: 5053
> NAT IPv6 Trap IP: 2001:db8:85a3:0:0:130:0:2
> NAT IPv6 Trap Port: 5054
> Node display name is "node1"
> Password for Junos Space maintenance mode is set.
A> Apply settings
C> Change settings
Q> Quit and set up later
R> Redraw Menu
Choice [ACQR]:
i.
Type A and press Enter to apply settings.
You are prompted to specify the location from where you want to restore
the backup.
1> Remote Server
2> USB
3> Local
M> Return to Main Menu
R> Redraw Menu
Choice [1-3 MR]:
59 Copyright © 2018, Juniper Networks, Inc.
Chapter 7: Performing Initial Configuration