Juniper Junos Space JA1500, Руководство по оборудованию

Страница: 57 / 210

Figure 11: DC Power Supply Grounding
9.
Connect the grounding lug to the earthing terminal using the screw, as shown in
Figure 11 on page 43 .
10.
Attach the plastic safety cover.
11.
Close the input circuit breaker.
The Junos Space Appliance starts powering on when you supply power to the power
supply module. If the power supply module is correctly installed and functioning normally,
the LED on the power supply module displays green when the power supply module is
powering the appliance, and amber when the power supply module is in standby mode
(not powering the appliance).
Related
Documentation
DC Power Grounding Requirements and Warning on page 182
•
•
DC Power Supply in Junos Space Appliances on page 17
•
General Electrical Safety Guidelines and Warnings on page 175
•
DC Power Disconnection Warning on page 181
•
DC Power Wiring Sequence Warning on page 183
•
DC Power Wiring Terminations Warning on page 185
•
Preventing Electrostatic Discharge Damage on page 176
Connecting a Junos Space Appliance to a Management Console
You can configure and manage a Junos Space Appliance by using a dedicated console.
Every appliance has a console port with an RJ-45 connector. Use the console port to
connect the appliance to the management console or to a console server. Ensure that
you have an Ethernet cable with an RJ-45 connector available. An RJ-45 cable, as shown
43 Copyright © 2018, Juniper Networks, Inc.
Chapter 6: Connecting the Appliance