Juniper Junos Space JA1500, Руководство по оборудованию

Страница: 96 / 210

c.
Retype your new password and press Enter.
If the password is changed successfully, the message
passwd: all authentication tokens
updated successfully
is displayed.
NOTE:
• All passwords are case-sensitive.
• You can choose a password that is at least eight characters long, and
that contains characters from at least three of the following four
character classes: uppercase letters, lowercase letters, numbers (0
through 9), and special characters.
However, if a password satisfies the preceding criteria but contains only
a single uppercase letter at the beginning or only a single number at the
end, then that password is considered invalid. In order to be counted as
a valid character class, a single uppercase letter must not be at the
beginning of the password, and a single number must not be at the end.
For example, Abcdwip9, Qc9rdiwt, and bRfjvin9 are invalid passwords,
but AAbcdwip99, Qc9rdiwtQ, and bRfjvin99 are valid passwords.
• Alternatively, instead of using a string of characters, you can choose a
passphrase that is between 16 and 40 characters long, and contains at
least three dictionary words separated by at least one special character.
For example, big#three;fork (14 characters long) and circlefaceglass
(no special characters) are invalid passphrases, but @big#three;fork&
and circle;face;glass are valid passphrases.
4.
Type the new password to log in to the appliance and press Enter.
5.
Type F to proceed with the configuration of the appliance as an FMPM node.
6.
Configure the IP address of the eth0 Ethernet interface.
This IP address is used as the IP address of the FMPM node.
Configuring Eth0 :
1> Configure IPv4
2> Configure Both IPv4 and IPv6
R> Redraw Menu
Choice [1-2,R]:
Copyright © 2018, Juniper Networks, Inc. 82
JA2500 Junos Space Appliance Hardware Guide