Juniper JSA3800, Руководство по оборудованию, Страница: 35 / 92

To mount the JSA3800 appliance on a four-post rack:
1.
Install the inner rail extensions (optional).
NOTE: The JSA3800 appliance includes a set of inner rails that are
preattached to the chassis. You can attach optional inner rail extensions
to stabilize the chassis within the rack.
a. Place the inner rail extensions on the side of the chassis such that the hooks on
the chassis clip securely into the rail extension holes.
b. Slide the extensions toward the front of the chassis.
c. Secure the rails with screws as shown in Figure 7 on page 35 .
Figure 7: Attaching the Inner Rail Extension
2.
Install the outer rails:
a. Attach the shorter outer rails to the longer outer rails.
b. Adjust the length of the rails so that they fit snugly into the rack.
c. Secure the rails to the front and rear of the rack using three M5 screws each as
shown in Figure 8 on page 36 .
35 Copyright © 2019, Juniper Networks, Inc.
Chapter 3: Initial Installation and Configuration