Juniper JSA3800, Руководство по оборудованию, Страница: 32 / 92

Table 11: Required Tools and Parts for Installing the JSA3800 Appliance
Tools and Parts Task
• Phillips (+) screwdriver, number 1
• Phillips (+) screwdriver, number 3
• Tie wrap
Installing the JSA3800 appliance
ESD grounding wrist strap Connecting the JSA3800 appliance
Phillips (+) screwdriver, number 1 Grounding the JSA3800 appliance
• Electrostatic bag or antistatic mat, for each
component
• ESD grounding wrist strap
Packing the JSA3800 appliance
See Also Overview of Installing the JSA3800 Appliance in a Rack on page 31
•
•
Installing the JSA3800 Appliance Using Front-and-Rear-Mounting Flush in a Four-Post
Rack on page 34
•
Mid-Mounting the JSA3800 Appliance in a Two-Post Rack on page 37
Related
Documentation
JSA3800 Site Guidelines and Requirements on page 25
•
•
Installing the JSA3800 in a Rack on page 32
•
Configuring the JSA3800 on page 44
Installing the JSA3800 in a Rack
•
Installing the JSA3800 Appliance on page 32
•
Installing the JSA3800 Appliance Using Front-and-Rear-Mounting Flush in a Four-Post
Rack on page 34
• Mid-Mounting the JSA3800 Appliance in a Two-Post Rack on page 37
Installing the JSA3800 Appliance
Place the shipping container on a flat surface and carefully remove the hardware
components.
To install the JSA3800 appliance:
1.
Mount the JSA3800 appliance in your server rack using the attached mounting
brackets. See
“Installing the JSA3800 Appliance Using Front-and-Rear-Mounting
Flush in a Four-Post Rack” on page 34 and “Mid-Mounting the JSA3800 Appliance in
a Two-Post Rack” on page 37 .
2.
Plug the power cord into the AC receptacles on the rear panel as shown in
Figure 5 on page 33 .
Copyright © 2019, Juniper Networks, Inc. 32
Juniper Secure Analytics 3800 Hardware Guide