Juniper JSA3800, Руководство по оборудованию, Страница: 45 / 92

5.
Select the appliance ID and then press Enter to select
Next
.
6.
Select normal from the following types of setup:
• normal —Default setup
•
recovery —HA recovery setup
7.
Select
Next
. The Tuning Template window appears.
8.
Select Enterprise and then select Next . The Date and Time window appears.
9.
Select the method you want to use to set the date and time:
• Manual –Allows you to manually input the date and time. Select Next .
• Server –Allows you to specify your time server. Select Next .
10.
Select your time zone continent or area, and then select Next .
11.
Select your time zone region, and then select
Next
. The options appearing in this
window are regions associated with the continent or area previously selected.
12.
Select one of the following Internet protocols, IPv6 or IPv4.
13.
Select Next . The Management Interface window appears.
14.
Select the interface you want to specify as the management interface and select
Next
.
15.
To configure the JSA network settings, enter the values for the following parameters.
Use the up or down arrow keys to navigate the fields:
• Hostname —Type a fully qualified domain name (FQDN) as the system hostname.
• IP Address —Specify the IP address of the system.
•
Netmask —Specify the network mask address for the system.
•
Gateway —Specify the default gateway for the system.
• Primary DNS —Specify the primary DNS server.
• Secondary DNS —(Optional) Specify the secondary DNS server.
•
Public IP —(Optional) Specify the public IP address of the server. The server uses
this IP address to communicate with another server that belongs to a different
network using Network Address Translation (NAT). NAT translates an IP address
in one network to a different IP address in another network.
•
Email Server —Specify the e-mail server. If you do not have an e-mail server, specify
the local host in this field.
16.
Use Tab to select
Next
. Press Enter . The New Root Password window appears.
45 Copyright © 2019, Juniper Networks, Inc.
Chapter 3: Initial Installation and Configuration