Juniper JRR200, Руководство по оборудованию

Страница: 71 / 108

Locating the Chassis Serial Number ID Label
The serial number ID label is located on the rear panel of the JRR200 route reflector.
Locating the Serial Number ID Labels on FRUs
The power supplies and fan trays installed in the JRR200 route reflector are
field-replaceable units (FRUs). The serial number ID label is on the top of the FRUs.
Contacting Customer Support
Once you have located the serial numbers of the device or component, you can return
the device or component for repair or replacement. For this, you need to contact Juniper
Networks Technical Assistance Center (JTAC).
You can contact JTAC 24 hours a day, 7 days a week, using any of the following methods:
• On the Web: Using the Case Manager link at
https://www.juniper.net/support/
• By telephone:
• From the US and Canada: 1-888-314-JTAC
•
From all other locations: 1-408-745-9500
NOTE: If contacting JTAC by telephone, enter your 11-digit case number
followed by the pound (#) key if this is an existing case, or press the star
(*) key to be routed to the next available support engineer.
When requesting support from JTAC by telephone, be prepared to provide the following
information:
•
Your existing case number, if you have one
•
Details of the failure or problem
• Type of activity being performed on the JRR200 route reflector when the problem
occurred
•
Configuration data displayed by one or more
show
commands
•
Your name, organization name, telephone number, fax number, and shipping address
The support representative validates your request and issues an RMA number for return
of the component.
Packing a JRR200 Route Reflector or its Components for Shipping
Before you pack a JRR200 route reflector or component:
• Ensure that you have taken the necessary precautions to prevent electrostatic discharge
(ESD) damage.
71 Copyright © 2018, Juniper Networks, Inc.
Chapter 6: Contacting Customer Support and Returning the Chassis or Components