Juniper EX9251, Руководство по оборудованию

Страница: 92 / 217

Parts and Tools Required for Connecting an EX Series Switch to Earth Ground
Before you begin connecting an EX Series switch to earth ground, ensure you have the parts and tools
required for your switch.
Table 33 on page 83 lists the earthing terminal location, grounding cable and lug specifications, and
parts needed for connecting an EX Series switch to earth ground.
Table 33: Parts Required for Connecting an EX Series Switch to Earth Ground
Switch Earthing
Terminal
Location Grounding
Cable
Requirements Grounding Lug
Specifications Screws and
Washers Additional
Information
EX2200 Rear panel of
the chassis 14 AWG
(2 mm²),
minimum 90° C
wire, or as
permitted by
the local code Panduit
LCC10-14BWL or
equivalent—
not provided
•
Two
10-32 x .25 i
n. screws
with #10
split-lock
washer—
not provided
•
Two #10 flat
washers—
not provided
EX2300-C Rear panel of
the chassis 14 AWG
(2 mm²),
minimum 90° C
wire, or as
permitted by
the local code Panduit
LCC10-14AW-L or
equivalent—
not provided
•
Two
10-32 x .25 i
n. screws
with #10
split-lock
washer—
not provided
•
Two #10 flat
washers—
not provided
83