Juniper EX4600, Руководство по оборудованию, Страница: 63 / 230

Related
Documentation
Console Port Connector Pinout Information for an EX Series Switch on page 45
•
•
Connecting an EX4600 Switch to a Network for Out-of-Band Management on page 155
Console Port Connector Pinout Information for an EX Series Switch
The console port on an EX Series switch is an RS-232 serial interface that uses an RJ-45
connector to connect to a console management device. The default baud rate for the
console port is 9600 baud.
Table 17 on page 45 provides the pinout information for the RJ-45 console connector. An
RJ-45 cable and an RJ-45 to DB-9 serial port adapter are supplied with the switch.
NOTE: If your laptop or PC does not have a DB-9 male connector pin and you
want to connect your laptop or PC directly to an EX Series switch, use a
combination of the RJ-45 to DB-9 female adapter supplied with the switch
and a USB to DB-9 male adapter. You must provide the USB to DB-9 male
adapter.
Table 17: EX Series Switches Console Port Connector Pinout Information
Description Signal Pin
Request to send RTS Output 1
Data terminal ready DTR Output 2
Transmit data TxD Output 3
Signal ground Signal Ground 4
Signal ground Signal Ground 5
Receive data RxD Input 6
Data carrier detect CD Input 7
Clear to send CTS Input 8
Related
Documentation
EX2200 Switches Hardware Overview
•
•
Rear Panel of an EX3200 Switch
•
Rear Panel of an EX3300 Switch
•
Rear Panel of an EX4200 Switch
•
EX4300 Switches Hardware Overview
•
Front Panel of an EX4500 Switch
45 Copyright © 2014, Juniper Networks, Inc.
Chapter 8: Port and Interface Specifications
* Optics, Fans and Power supply sold separately for EX4600-40F-S.