Juniper EX2200 Series, Руководство по оборудованию, Страница: 80 / 214

To mount the switch in a recessed position on four posts, follow the instructions in
“Mounting an EX2200 Switch on Four Posts of a Rack or Cabinet” on page 76 . To mount
the switch in a recessed position on two posts, follow the instructions in “Mounting an
EX2200 Switch on Two Posts of a Rack or Cabinet” on page 74 .
Mounting an EX2200 Switch on a Wall
This topic describes the process of mounting an EX2200 switch on a wall.
1.
Mounting an EX2200 Switch Except the EX2200-C Model on a Wall on page 80
2.
Mounting an EX2200-C Switch on a Wall on page 82
Mounting an EX2200 Switch Except the EX2200-C Model on a Wall
You can mount an EX2200 switch on a wall by using the separately orderable wall-mount
kit.
WARNING:
When mounting an EX2200 switch chassis in a vertical position, orient the
front panel of the chassis downward to ensure proper airflow and meet
safety requirements in the event of a fire.
•
•
When wall mounting Power over Ethernet (PoE) models (EX2200-24P
and EX2200-48P), install the wall-mount baffle above the units to reduce
the risk of objects or substances falling into the air exhaust or power supply,
which could cause a fire.
Before mounting the switch on a wall:
•
Verify that the site meets the requirements described in “Site Preparation Checklist
for EX2200 Switches” on page 41 .
• Read “General Safety Guidelines and Warnings” on page 176 , with particular attention
to “Chassis and Component Lifting Guidelines” on page 181 .
Ensure that you have the following parts and tools available:
•
2 wall-mount brackets (provided in the wall-mount kit)
•
1 wall-mount baffle (provided in the wall-mount kit)
• 12 wall-mount bracket screws (provided in the wall-mount kit)
• 6 mounting screws (8-32 x 1.25 in. or M4 x 30 mm) (not provided)
•
Hollow wall anchors rated to support up to 75 lb (34 kg) if you are not screwing the
screws directly into wall studs (not provided)
• Phillips (+) screwdriver, number 2
Copyright © 2018, Juniper Networks, Inc. 80
EX2200 and EX2200-C Switches Hardware Guide