This guide provides an overview and description of the line modules (LMs), switch route
processor (SRP) modules, and I/O modules available for the following Juniper Networks
E Series Broadband Services Routers: ERX14xx models, ERX7xx models, and the ERX310
router.
Unless otherwise specified, all line modules pair with I/O modules to create a module
combination. Each module combination provides particular capabilities and connections
in an ERX router.
NOTE:
A release may support multiple versions of a module. For information,
see Software Compatibility in JunosE System Basics Configuration Guide,
Chapter 6, Managing Modules.
Table 1 on page 3 lists the module combinations supported by ERX routers.
This book also contains three appendixes:
•
Module Protocol Support on page 87
•
Module LEDs on page 109
•
Module Name Cross-Reference Information on page 115
•
Product Reclamation and Recycling Program on page 119
For more information about ERX routers and modules, refer to the following books:
•
Modules that have reached end-of-life—
E Series End-of-Life Module Guide
•
Module installation and maintenance—
ERX Hardware Guide
•
Managing ERX routers—
JunosE System Basics Configuration Guide
•
Configuring ERX modules—
JunosE Link Layer Configuration Guide
Copyright © 2010, Juniper Networks, Inc.
2
ERX 11.3.x Module Guide
Содержание E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV 27-9-2010
Страница 86: ......
Страница 108: ...Copyright 2010 Juniper Networks Inc 108 ERX 11 3 x Module Guide ...
Страница 118: ...Copyright 2010 Juniper Networks Inc 118 ERX 11 3 x Module Guide ...
Страница 121: ...Copyright 2010 Juniper Networks Inc ...