Juniper CTP151 Platform, Руководство по оборудованию, Страница: 66 / 104

To protect the modules, components, and slots when installing components, observe the following guidelines:
CAUTION: When handling components, use an antistatic wrist strap connected to a
proper grounding device. This action helps to protect the module from damage by
electrostatic discharge.
CAUTION: Always handle a module by its edges. Do not touch the components, pins,
leads, or solder connections.
CAUTION: Be sure to cover every empty slot with a blank filler panel to protect the
device from dust or other foreign substances and to ensure proper device cooling.
CAUTION: Do not discard the antistatic bag. When a module is not in use, store it in
an antistatic bag.
RELATED DOCUMENTATION
Safety Guidelines and Warnings for Installing CTP151 Modules | 45
Required Tools and Safety Items for Installing CTP Modules | 58
Required Tools and Safety Items for Installing CTP Modules
You need the following tools to install the interface module of a CTP151 device:
•
Phillips screwdriver
•
ESD wrist strap or other grounding device
RELATED DOCUMENTATION
Safety Guidelines and Warnings for Installing CTP151 Modules | 45
58