Juniper CTP151 Platform, Руководство по оборудованию, Страница: 62 / 104

•
Place the rack in its permanent location, allowing adequate clearance for airflow and maintenance, and
secure it to the building structure.
•
Read CTP Safety Guidelines and Warnings.
•
Remove the device from the shipping carton.
Ensure that you have the following parts and tools available:
•
Phillips (+) screwdriver, number 2
•
2 mounting brackets and 8 mounting screws (provided in the accessory box shipped with the device)
•
Screws to secure the chassis to the rack (not provided)
NOTE: One person must be available to lift the device while another secures the device to the
rack.
CAUTION: If you are mounting multiple devices on a rack, mount a device in the
bottom of the rack first and proceed to mount the rest of the devices from bottom to
top.
To mount the device on two posts in a rack:
1. Place the device on a flat, stable surface.
2. Align the mounting brackets along the front, rear, or center of the side panels of the device chassis
depending on how you want to mount the device. For example, if you want to front-mount the device,
align the brackets along the front of the side panel. See Figure 9 on page 54 .
Figure 9: Attaching the Mounting Brackets to the Side Panels of the CTP151 Device
g100908
3. Align the bottom holes in the mounting brackets with holes on the side panels of the device chassis.
54