Juniper CTP151 Platform Скачать руководство пользователя страница 59

Страница: 59 / 104

CHAPTER 9

Unpacking and Mounting the CTP151 Device

IN THIS CHAPTER

Unpacking a CTP151 Device | 51

Parts Inventory (Packing List) for a CTP151 Device | 52

Registering Products—Mandatory for Validating SLAs | 53

Mounting a CTP151 Device on Two Posts in a Rack | 53

Unpacking a CTP151 Device

The CTP151 device is shipped in a cardboard carton, secured with foam packing material. The carton has

an accessory compartment and contains the quick start instructions.

CAUTION:

CTP151 device is maximally protected inside the shipping carton. Do not

unpack the devices until you are ready to begin installation.

To unpack the device:

1. Open the carton.

2. Pull out the packing material holding the device in place.

3. Verify the parts received against the inventory on the label attached to the carton. See

“Parts Inventory

(Packing List) for a CTP151 Device” on page 52

4. Save the shipping carton and packing materials in case you need to move or ship the device later.

Содержание CTP151 Platform









































































































Результаты поиска

Содержание CTP151 Platform

Отзывы:

Juniper CTP151 Platform, Руководство по оборудованию, Страница: 59 / 104

Результаты поиска

Содержание CTP151 Platform

Отзывы: