Juniper CTP151 Platform, Руководство по оборудованию, Страница: 20 / 104

CHAPTER 2
CTP151 Interface Modules
IN THIS CHAPTER
CTP151 Serial Interface Module | 9
CTP151 Multiservice Interface Module | 10
CTP151 T1/E1 Interface Module | 12
CTP151 Serial Interface Module
The Juniper Networks CTP151 Circuit to Packet platform optionally includes a replaceable CTP150–IM-SER
serial interface module that can be paired with another module of the same type or a T1/E1 interface
module. The serial interface module also has the option of supporting two multiservice daughter cards for
4-KHz or high-quality analog audio, or interrange instrumentation group (IRIG) signals. See “CTP151
Multiservice Interface Module” on page 10 for details.
The four-port serial interface module supports individual cabling for each port. The CTP151 ports have
small serial ports for HD-26 26-pin connectors (see Figure 5 on page 9 ). The lowest-numbered port
(marked 0) is at the bottom left, and the highest-numbered port (marked 3) is at the top right.
Figure 5: CTP151 Serial Interface Module
g100916
2 1
2
—
1
—
STATUS LED Four small serial ports and one clock reference port
9