Juniper BX7000, Руководство по оборудованию, Страница: 23 / 138

Hardware Components 5
CHAPTER 1: BX7000 Multi-Access Gateway Overview
Table 1 on page 5 summarizes the physical specifications for the gateway chassis.
The gateway chassis can be mounted horizontally in a rack or vertically on a wall. All the power
receptacles, input/output ports, and expansion slots are located on the front panel of the gateway.
Figure 2: Front View of the BX7000 Multi-Access Gateway
Front Panel
The front panel of the gateway has two power supplies, 16 T1/E1 ports, two console ports, one
universal serial bus (USB) host port, five Ethernet ports, one external alarm contact, LEDs that
allow you to view the status of the gateway and the ports, and two slots for expansion (see
Figure 3 on page 5).
Figure 3: Front Panel of the BX7000 Multi-Access Gateway
LEDs
Port LEDs
For more information on port LEDs, see “T1/E1 Ports” on page 6 and “Ethernet Ports” on page 8.
Table 1: Physical Specifications
Description Value
Chassis dimensions 2.6 in. (6.7 cm) high
17.51 in. (44.47 cm) wide
9.44 in. (23.97 cm) deep (from front to rear chassis)
Gateway weight DC model: 14.1 lb (6.4 Kg)
AC model: 13.22 lb (6.0 kg)
Air
Ground
Power supply
System LED
T1/E1 Ports
Optical ports
External alarm
Power supplies
Copper ethernet ports USB host port
RJ-45 console port
USB console port
Grounding studs
BX 7000
g002902
CLOCK CARD
EXPANSION BAY
INTERFACE CARD
EXPANSION BAY
0 2 4 6 8 10 12 14 0 2 4 6 8 10 12 14
1 3 5 7 9 11 13 15 1 3 5 7 9 11 13 15