Juniper Archer 3, Руководство пользователя

Страница: 24 / 52

20
Archer 3 Rugged Handheld Owner’s Manual
Storage, Maintenance, and Recycling
Follow the instructions in this chapter to properly maintain
and recycle the Archer 3.
Storing the Archer 3 and Battery Pack
When the handheld is not being charged and is suspended,
it draws a small amount of power. This power draw is used to
maintain the memory (RAM) of the handheld in the same state
it was when it was suspended. We recommend charging the
handheld each night or weekend when it is in suspend mode.
If the Archer 3 is not charged while in suspend mode and the
battery reaches a low charge, it automatically powers off to
prevent further drain on the battery.
Note: Data and programs are secure as long as they have
been saved, even if the battery pack becomes discharged.
The handheld does not depend on the battery to store the
data for extended periods.
Storing the Archer 3 for Less Than Two Weeks
To store the handheld for less than two weeks, complete the
following steps:
1. Close all applications.
2. Plug the handheld into the AC wall adapter that was
shipped with your unit.
Storing the Archer 3 for More than Two Weeks
To store the handheld for two weeks or more, complete the
following steps:
1. Charge the battery pack 30 to 50 percent.
2. Close all running programs, and power off the handheld
by holding the power button until the Power Button menu
appears and selecting Power Off .
CAUTION: Power-off the Archer 3 before removing the
battery. If you remove the battery without powering-off
the handheld, you may damage the handheld and/or
lose data.
3. Remove the battery pack.
4. Place the battery pack in a dry location.
!