Juniper Allegro CX, Руководство пользователя

Страница: 95 / 122

87
C
Utility Software
Information in this chapter explains how to use and set up the following utility software:
• GPS Status (page 87)
•
GPS Config (page 93)
• Save System (page 95)
• Set DAQ Registry Keys (page 96)
GPS Status
Use GPS Status (Figure C-1) to perform any of the following tasks:
•
view current GPS data, such as number of satellites in view, GPS coordinates,
amount of time since the last GPS fix, and current GPS time.
• enable the Offset option to view the distance between two points.
•
enable the Beep option if you want the Allegro to beep when GPS readings update.
•
set a Display Format for GPS coordinates (degrees and minutes or decimal
degrees).
•
change COM port and baud rate settings for a second GPS receiver (dual GPS).
•
set up the Allegro to use the PPS timing signal received by the internal GPS module
instead of a second GPS receiver.
•
copy GPS coordinates to the system clipboard or an opened PTab spreadsheet file.