Juniper Advanced Threat Prevention Appliance Скачать руководство пользователя страница 55

Страница: 55 / 120

CLI Command Reference Guide

restore

Table 3-14 restore

Description

Restores the system configuration to the factory default settings.

Product(s) CLI

All-in-One | Collector | Core CM | Mac Mini OS X Detection Engine

Mode(s)

Server

Syntax

restore [support | firewall {backup | default} | hostname
| network]

Parameters

Note:

vCore for AWS

does not use the
following CLI
commands:
restore hostname
restore network

Example

The following example restores the system.

JATP # restore

This next example restores the SSH login “support” password to the default.

JATP # restore support password

Restore the default suppport password? (Yes/No)? yes

support password was restored successfully!

support

Restores the default support password setting for SSH
remote login (set during initial installation per license).
See also (server)# set (server mode) support

firewall
{backup |
default}

Restores the firewall settings from either the previous
backup, or from the default factory settings.

Whitelist rules rely on normal service shutdown to be

backed up.Powering off a VM directly will lose the whitelist

state as rules cannot be saved in that case

hostname

Restores the system’s hostname to the factory default
hostname.

network

Restores the IP address and DNS settings to the
factory default settings.

WARNING: This command option removes the current
IP address and DNS settings, and reloads the default
values for these settings.

Содержание Advanced Threat Prevention Appliance






















































































































Результаты поиска

Содержание Advanced Threat Prevention Appliance

Отзывы:

Juniper Advanced Threat Prevention Appliance, Руководство по справочным командам CLI, Страница: 55 / 120

Результаты поиска

Содержание Advanced Threat Prevention Appliance

Отзывы: