Juniper ACX2000, Руководство по оборудованию

Страница: 53 / 190

Table 8: PoE Port Features
Description Feature
IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) Supported standards
65 W Per port power limit
Copper Ethernet LAN cable Cable
RJ-45 Connector
0/1/3 POE and 0/1/7 POE Port numbering (hardware)
ge-0/1/3 and ge-0/1/7 Port numbering (software)
Gigabit Ethernet SFP Ports
The GE ports described in Table 9 on page 53 support small form-factor pluggable (SFP) transceivers.
NOTE: On the ACX2000 router, you can use Gigabit Ethernet transceivers in the GE ports, or
you can use 10-Gigabit Ethernet transceivers in the XE ports. Use one set of ports at a time. On
the ACX2100 router, you can use both sets at the same time.
Table 9: SFP Port Features
Description Feature
See the Hardware Compatibility Tool for the specifications of transceivers
supported on the ACX2000 or ACX2100. The list of supported transceivers
for the ACX2000 is located at
https://pathfinder.juniper.net/hct/product/#prd=ACX2000 . The list of
supported transceivers for the ACX2100 is located at
https://pathfinder.juniper.net/hct/product/#prd=ACX2100 .
Supported standards
Cable
Connector
•
ACX2000: 0/2/0 and 0/2/1
•
ACX2100: 1/1/0 through 1/1/3 and 1/2/0 and 1/2/1
Port numbering (hardware)
•
ACX2000: ge-0/2/0 and ge-0/2/1
•
ACX2100: ge-1/1/0 through ge-1/1/3 and ge-1/2/0 and ge-1/2/1
Port numbering (software)
53