Jungle Jim’s Gas can holder 2.5, Инструкция по эксплуатации

Страница: 4 / 6

JUNGLE JIM’S ACCESSORY PRODUCTS www.junglejimsap.com 1-888-844-5467 REV 3-9-20
1 Take 1 of the 45” straps & thread one end through
both sides of a tri-glide fastener as shown:
2 Loop the end through the bottom of the gas can
holder exactly as shown:
3 Thread the end back through the tri-glide on top of
the strap you inserted in step 1.
4 Using the opposite end of the same strap, repeat
step 1.
5 Using the male side of the buckle, thread the strap
through the bottom then over the first opening and
back through towards the tri-glide. Then feed strap
through bottom of tri-glide.
6 With the 2
nd
strap, repeat steps 1 – 3, as shown
below