13
v1.9
31.08.2021
5.
Configuration
The following chapter explains the necessary steps for setting up the WMT as well as
other individual software configurations.
5.1
Jungheinrich WMT Setup Wizard
The Jungheinrich WMT Setup-Wizard can be used to set up the WMT and starts automatically at the
first boot. The
„WMT Setup Wizard” can set up the following configurations.
-
Language and region
-
Date, time and time zone
-
Computer name
-
Network configuration (TCP/IPv4)
-
WLAN profiles
The Setup Wizard will always be restarted until it has been completed once.
The WMT Setup Wizard can be started and reset manually using the scripts in the following path:
“C:\Program Files\Jungheinrich\Setup Assistant\setupass.exe”
Note
A system reboot is necessary to complete the device configuration.
Note
The WMT Setup Wizard supports preconfiguring the following WLAN profiles: WEP or WPA /
WPA2 encryption with a Pre-Shared-Key (PSK) authentication. WLAN-Profiles using EAP-authen-
tication must be configured manually by using the Windows network configuration centre.
