Jungheinrich EKE 20 b, Руководство по эксплуатации

Страница: 44 / 53

F 5
0402
.GB
a) Wheel bolts to be first checked for tightness after approx. 100 operating hours,
tighten, if necessary.
b) Hydraulic connections to be first checked for leakage after approx. 100 operating
hours; tighten, if necessary.
c) Check the steering chain tension for the first time after ca. 100 operating hours and adjust,
if necessary.
d) First change after 500 operating hours.
A
The maintenance intervals refer to normal service conditions. In case of aggravated
conditions, the intervals must be reduced as required.
Maintenance intervals
Standard =
t
W M M M
Cold-storage depot =
k
1 3 6 12
Electrical sys-
tem: 9.1 Performance check
t
9.2 Check all cables for secure connection and damage
t
9.3 Check the fuses for correct amperage
t
9.4 Check switches and trip cams for secure attachment
and correct functioning
t
9.5 Check the warning installations and safety circuits for
correct functioning
k t
9.6 Check contactors, replace wearing parts if necessary
t
Electric mo-
tors: 10.1 Check the carbon brushes for wear
t
10.2 Check the motor for secure attachment
t
10.3 Clean motor housing by means of a vacuum cleaner and
check the commutator for wear
k t
10.4 Check whether the cover of the steering-engine potenti-
ometer is present.
Battery: 11.1 Check acid density, acid level and cell voltage
k t
11.2 Check the terminals for secure attachment and apply
grease
k t
11.3 Clean battery connections, check for tight seat
k t
11.4 Check the battery cables for damage, renew, if neces-
sary
t
11.5 Check whether the battery lock is fully functioning
t
Lubrication: 12.1 Grease the vehicle in accordance with the lubrication
schedule
k t
General
measure-
ments: 13.1 Check the electrical system for a grounding fault
t
13.2 Check the driving speed and braking distance
t
13.3 Check the lifting and lowering speed
t
13.4 Check safety and shutdown devices
t
Demon-
stration: 14.1 Perform a trial run under a nominal load
t
14.2 Upon completion of servicing operations, demonstrate
the vehicle to the person responsible
k t
F 5
0402
.GB
a) Wheel bolts to be first checked for tightness after approx. 100 operating hours,
tighten, if necessary.
b) Hydraulic connections to be first checked for leakage after approx. 100 operating
hours; tighten, if necessary.
c) Check the steering chain tension for the first time after ca. 100 operating hours and adjust,
if necessary.
d) First change after 500 operating hours.
A
The maintenance intervals refer to normal service conditions. In case of aggravated
conditions, the intervals must be reduced as required.
Maintenance intervals
Standard =
t
W M M M
Cold-storage depot =
k
1 3 6 12
Electrical sys-
tem: 9.1 Performance check
t
9.2 Check all cables for secure connection and damage
t
9.3 Check the fuses for correct amperage
t
9.4 Check switches and trip cams for secure attachment
and correct functioning
t
9.5 Check the warning installations and safety circuits for
correct functioning
k t
9.6 Check contactors, replace wearing parts if necessary
t
Electric mo-
tors: 10.1 Check the carbon brushes for wear
t
10.2 Check the motor for secure attachment
t
10.3 Clean motor housing by means of a vacuum cleaner and
check the commutator for wear
k t
10.4 Check whether the cover of the steering-engine potenti-
ometer is present.
Battery: 11.1 Check acid density, acid level and cell voltage
k t
11.2 Check the terminals for secure attachment and apply
grease
k t
11.3 Clean battery connections, check for tight seat
k t
11.4 Check the battery cables for damage, renew, if neces-
sary
t
11.5 Check whether the battery lock is fully functioning
t
Lubrication: 12.1 Grease the vehicle in accordance with the lubrication
schedule
k t
General
measure-
ments: 13.1 Check the electrical system for a grounding fault
t
13.2 Check the driving speed and braking distance
t
13.3 Check the lifting and lowering speed
t
13.4 Check safety and shutdown devices
t
Demon-
stration: 14.1 Perform a trial run under a nominal load
t
14.2 Upon completion of servicing operations, demonstrate
the vehicle to the person responsible
k t