manualshive.com logo in svg

Jungheinrich EJD 220, Руководство по эксплуатации

Поделиться
Скачать
Jungheinrich EJD 220 Скачать руководство пользователя страница 95

4.9.6

Lowering two palletised loads in turn

CAUTION!

Loads  must  not  be  deposited  on  travel  or  escape  routes,  in  front  of  safety
mechanisms or plant equipment that must be accessible at all times.

Requirements

– Storage location suitable for storing the load.

Procedure

• Drive the truck carefully up to the first storage location.
• Lower the support arms until the load is resting on the floor.
• Carefully move the support arms out of the pallet.
• Lower the load handler, see page 88.
• Drive the truck carefully up to the second storage location.
• Lowers the load handler.

Z

To  avoid  damaging  the  load  and  the  load  handler,  avoid  setting  the  load  down
abruptly.

• Lower the load handler so that it is clear of the load (see page 84).
• Carefully drive the load handler out from beneath the pallet.

Both pallets are lowered.

93

04.19 en-GB

Содержание EJD 220



































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды