39
38
6.4 Time zone adjustment
The Junghans Mega MF radio-controlled watch can pick up the sig-
nals from the DCF77, WWVB, JJY40 and JJY60 transmitters. Within
the transmitter coverage areas your watch will thus reliably display
summer or winter time respectively. If you travel to a country in
another time zone, you can have the local time there displayed as a
2
nd
time in the lower section of the display (to set this, see ’Second
time’ section) and/or adjust the analogue time shown to the local
time.
You do this by pressing the T1 button repeatedly until the date is
shown on the LCD display. You then press the T2 button. The hour
is now also shown digitally on the LCD display (e.g.: [T12] for 12
noon). You adjust the time zone, and thus also the hands, to the
time in the zone in question by pressing the T2 button again. You
can use the digital hour display to help you set the correct time.
Repeatedly pressing the T2 button enables you to set the hour in
fast forward mode. You can set all time zones using the T2 button.
As you do so, the date, if necessary, is also automatically adjusted.
If you want to set the 1st time, and thus the analogue time display,
back again to the original time, then please do so by following the
same procedure.
6.5 Set language (day of the week display)
The language for the day of the week display on your Junghans
Mega MF radio-controlled watch is set at the factory to German.
To change the day of week display to a different language, press
the T1 button until [DE] for German (Deutsch) is shown on the LCD
display. By pressing briefly on the T2 button, you can then change
the date display to English. [En] for English will now be showing on
the LCD display.
7. Restart / getting started
Following a change of battery, your watch will automatically begin
a restart routine. After you insert the battery, the hands will move
to the 12 o’clock position and your watch will start trying to pick up
the time signal. As it does so, the reception symbol of the transmit-
ter it is currently trying to pick up flashes. As soon as a signal is
being received, the seconds on the LCD display start to advance.
After a few minutes, if the reception process has been successful,
the watch automatically sets itself to the correct transmitter time.
x
On successful reception of the DCF77 transmitter, CET local time
is shown, the reception display for the DCF77 is activated on the
LCD and the date is displayed with the day of the week in
German.
