Junghans J880.3, Инструкция по эксплуатации

Страница: 4 / 74

20 21
Setting the time
Pull the winder into position B. That stops the watch movement.
To set your watch accurately to the second, it is best to stop the
movement as the second hand is passing the figure 60. You can now
position the minute hand precisely in line with the relevant minute
marker and set the desired time. Press the winder back into position A
to start the second hand.
Features and functions
Calibre J880.3 Chronoscope functions
Initiating time measurement
Begin the chronoscope function by pressing the start-stop pusher (7).
Stopping time measurement:
Stop the chronoscope function by pressing the start-stop pusher (7)
again.
Resetting:
Press the reset pusher (9). This resets both stopwatch hands to their
zero position.
Addition time measurement:
Press the start-stop pusher (7) again after the respective measurement
to add the stop times. The chronoscope hands will then recommence
from the stopped position.
2 7
4
9
6
3
8
10
A B
1
5
1 Telemeter scale
2 Hour hand
3 Minute counter
4 Stop second counter
5 Tachymeter scale
6 Minute hand
7 Start-stop pusher
8 Crown
9 Reset pusher
10 Second hand