7. BOOT DISPLAY AND TROUBLE SHOOTING
BOOT DISPLAY AND
T
ROUBLE SHOOTING
7
BLE SHOOTING
7
BOOT DISPLAY
7.1
BOOT DISPLAY
7.1
display
display
meaning / explanation
meaning / explanation
DYNAMICS
PROCESSOR
display of model
C: x.x
display of loaded controller software version
D: x.x
display of loaded dsp software version
ERROR MESSAGES AND TROUBLE SHOOTING
7.2
display
error / message
remedies
NO SYNC
no sync at sync input!
!
connect the sync input
(selectable in signal
processing setup menu) with
valid input signal
INITIALIZATION
OF
THE
UNIT
7.3
Should have remained the device no more
operable and/or in the program execution,
recommends itself an initialization the device.
During initialization, all storage areas important
for the program and registers are loaded with
the factory setup and the program is restarted.
Any button is to be held pressed in order to
initialize the device during switch-on.
After the unit is started escorted by the
completion of the displays (how described in
7.1), the device is ready for operation with the
factory setup.
After an initialization of the device, all user
presets and adjustments are erased and/or
overwritten by the factory setup!
Operation manual accent2, chapter 7 -Boot display and trouble shooting- page 7-1