4 Information for electrically skilled persons
4.1 Fitting and electrical connection
Fitting the leakage sensor
Figure 3: Appropriate and inappropriate locations for fitting
i
Do not place the device on sloping surfaces, ridges or pedestals(figure 3).
Look for an appropriate installation location at which escaping water can be detected early.
o
Place the device directly on the surface that is to be monitored. The sensor surface (3)
must point downwards.
o
Mount the device on the supporting surface, e.g. with a screw assembly.
i
The vent opening (4) may not be used to mount the device.
i
For proper function, liquid must be able to reach the sensor surface (3).
i
Do not mount the device to the substrate with sealing compound (silicone, acrylic or
similar).
o
Fit the connecting cable, e.g. with nail clamps.
i
The vent opening (4) supports the sensor function and should be free of dirt.
3/5
82595823
j0082595823
24.05.2018
Leakage sensor
