Figure 4: Connection box opened
(5) Screw sleeve
(6) Front plate
(7) Screws/anchor set
(8) Connection box
(9) Lid of the connection box
(10) Lid screw
(11) Cable penetration
(12) Power supply connection, yellow/white connector
(13) Bus connection, red/black connector
Recommended installation height: 1.50 m.
Installation only using deep concealed appliance box, double.
Only for horizontal installation.
Only install on flat walls.
i
Soiling in the slots on the front plate, e.g. due to unsuitable pins or paper strips, cannot be
removed. The labelling of the sensor areas must be able to resist wipes and moisture and
must be made on suitable media, e.g. transparent film.
Recommendation: Use two layers of transparent film and label the inner side (figure 5).
Figure 5: Labelling with two layers of transparent film
4/7
82575503
J:0082575503
07.12.2010
Signal panel
