KNX
Switching actuator / shutter actuator
Ref.-no.: 2116.10 REG
Operating Instructions
Switching actuator / shutter actuator
1. System information
This unit is a product of the instabus-EIB-System and corresponds to the
EIBA Guidelines. Detailed technical knowledge acquired in instabus
training courses is a prerequisite for the understanding of the system.
The functions of the device are software-dependent. Detailed information
on the software and the functions implemented and the software itself are
available from the manufacturer’s product data bank.
Planning, installation and commissionning of the device are effected with
the help of EIBA-certified software.
For the productdatabase and technical descriptions please refer to the
internet at www.jung.de offering up-to-date information.
2. Safety warnings
Attention: Electrical equipment must be installed and fitted only by
qualified electricians and in observance of the applicable accident
prevention regulations.
To prevent electric shocks, disconnect the power supply before
working on the device (by cutting out the circuit breaker).
Any non-observance of the fitting instructions may cause fire or
other hazards.
Shutter actuator applications: Connect only shutter motors to the
device.
Appropriate safety measures must be taken to exclude any hazards
deriving from motor-operated components.
Stand: Jun-08 825 238 13
