o
Return to main menu: Press the left menu button "Back".
Save switch-on brightness
A switch-on brightness can be set and saved for dimmer actuators.
o
Open the main menu.
o
Select "Channels" and press
OK
.
o
Select the desired hand-held transmitter channel.
o
Set required switch-on brightness.
o
Press the right menu button "Open".
o
Select "Set Startvalue" and press
OK
.
The light is briefly switched off and switched on again to the switch-on brightness. Switch-
on brightness is saved.
o
Return to main menu: Press the left menu button "Back" for approx. 1 second.
Scene menu: Recall scenes
The "Scenes" menu offers 16 scenes, irrespective of whether or not actuators are connected,
as well as the functions 'Channel lock' and 'Lock-out protection'.
o
Open the main menu.
o
Select "Scenes" and press
OK
.
o
Select the desired scene and press
OK
.
The message "Scene called" appears in the footer.
o
Return to main menu: Press the left menu button "Back".
Scene menu: Changing a scene
o
Call up the scene to be changed.
o
Change the active scene as desired.
o
Return to the scene menu.
o
Select the desired scene and press the right menu button "Open".
o
Select "Store scene" and press "Save".
The message "Store scene" appears in the footer.
o
Return to main menu: Press the left menu button "Back" for approx. 1 second.
Activating and removing a button lock
The button lock locks all the buttons of the hand-held transmitter against operation.
o
Activating the button lock: Open the main menu, select the menu item "Button lock" and
press
OK
.
All the push-button functions of the hand-held transmitter are disabled.
The display indicates this state.
o
Removing a button lock: Press the right menu button "Unlock" for approx. 3 seconds.
4.5 Setting up the hand-held transmitter
Creating lists
Lists allow quick access to frequently used hand-held transmitter channels or scenes. Lists can
be accessed using appropriate names in the main menu.
The hand-held transmitter is connected to all the actuators that are to be operated.
o
Open the main menu.
o
Select "Programming" and press
OK
.
o
Select "Lists" and press
OK
.
o
Select the desired list and press
OK
.
o
Select "Assign function" and press
OK
.
6/18
82582333
J0082582333
29.03.2017
eNet radio hand-held transmitter with display, 24-gang
