eNet radio switch/push-button actuator 1-gang, for rail mounting
eNet radio switch/push-button actuator 1-gang, for rail mounting
Art. No. : FMAS16REG
Operating instructions
1 Safety instructions
Electrical devices may only be mounted and connected by electrically skilled
persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect before carrying out work on the devise or
load. In so doing, take all the circuit breakers into account, which support dangerous
voltages to the device and or load.
Danger of electric shock. During installation and cable routing, comply with the
regulations and standards which apply for SELV circuits.
Danger of electric shock. Device is not suitable for disconnection from supply voltage.
Fire hazard! Operation exclusively with the power supplies listed under accessories
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1: Device components
(1) Load connection
(2) Operating mode switch
(3) Button
Prog
(4) Status LED
(5) Bus line connection
3 Function
Intended use
-
Switching of lighting
-
Operation with suitable eNet radio transmitters
1/12
82581723
J0082581723
23.03.2017
