i
Switch actuator: The light can be switched on or off by pressing the programming button
briefly (for about 1 second).
i
Push-button actuator: By pressing the programming button, the light can be switched on for
as long as the button is pressed.
5.2 Commissioning
i
Observe the instructions for the radio transmitter.
DANGER!
Electrical shock when live parts are touched.
Electrical shocks can be fatal.
Before working on the device, cover up live parts in the working environment.
Teach-in radio transmitter
i
If all memory slots are occupied, a radio transmitter which has already been taught must
first be deleted. To do this, delete all taught channels and light scenes of the radio
transmitter individually.
The distance between the receiver and the radio transmitter is from 0.5 m to 5 m.
The light is switched off.
o
Press the programming button of the switch/push-button actuator or the installation button
for approx. 4 seconds.
i
When the installation button is pressed the load is switched on for a duration of approx.
4 seconds.
The LED flashes. The switch/push-button actuator is in programming mode for approx.
1 minute.
o
Trigger teach telegram on radio transmitter, see instructions for radio transmitter.
The LED lights up. The radio transmitter has been taught.
o
Press the programming button of the actuator or the installation button briefly.
Light switches on. The actuator is in operating mode.
i
Programming mode is exited automatically after about 1 minute.
i
Only switch actuator: Teach light scene push-buttons separately.
i
Only switch actuator: When a radio transmitter is taught, All On and All Off buttons that are
present are automatically also taught.
Deleting radio transmitters individually
o
Teach the radio transmitter to be deleted again (see Teaching a radio transmitter).
LED blinks quickly. The radio transmitter has been deleted.
i
If several channels or light scenes of a radio transmitter have been taught, they all must be
deleted individually.
6 Appendix
6.1 Technical data
Rated voltage
AC 230 V ~
Mains frequency
50 / 60 Hz
Switching current
Ohmic
10 A
Switch-on current 20 ms
max. 120 A
Minimum switching current AC
100 mA
Ambient temperature
0 ... +45 °C
Storage/transport temperature
-25 ... +70 °C
Connected load
Incandescent lamps
2300 W
4/6
82549913
J:0082549913
12.07.2011
Radio Management
Radio actuator for rail mounting
