LB management
Brightness / temperature sensor Bluetooth
Brightness / temperature sensor Bluetooth
Art. no.: 1792HTBT
Operating instructions
1
Battery safety instructions
This device or its accessories are supplied with batteries in the form of button cells.
DANGER! Batteries can be swallowed. This can lead directly to death by suffocation. Danger-
ous substances may cause severe internal burns leading to death within 2 hours.
Keep new and used batteries away from children.
Do not use devices if the battery compartment does not close securely and keep away from
children.
If you suspect that a battery has been swallowed or is in any orifice of the body, seek immediate
medical attention.
WARNING! Improper handling of batteries can result in explosion, fire or chemical burn due to
leakage.
Do not heat or throw batteries into fire.
Do not reverse polarity, short-circuit or recharge batteries.
Do not deform or disassemble batteries.
Replace batteries only with an identical or equivalent type.
Remove empty batteries immediately and dispose of in an environmentally friendly manner.
These instructions are an integral part of the product, and must remain with the end customer.
2
Intended use
–
Sensor for detecting brightness and temperature
–
Operation with Bluetooth universal timer from LB management
–
Adhesive mounting in the interior on windows
3
Commissioning
Open the housing
Figure 1: Open the housing
■
Open the housing by pushing it apart. To do so, insert a thin slotted screwdriver into the
opening recess (Figure 1) and raise it up so that two catches are passed.
1 / 5
82599913
11.11.2019
J0082599913