Image 1: Connection example of the insert
(1)
Button TEST
(2)
Cover interface with LED
(3)
Insert
(4)
Remote sensor for external temperature measurement
(5)
Electric underfloor heating or electrothermal valve drive
(6)
Switching contact for switching to cooling mode (optional)
Image 2: Terminal-specific cable cross-section
￭
Connect insert (3) according to the connection diagram (see figure 1). Note
clampable cable cross-sections (see figure 2).
￭
Optionally connecting external remote sensor (4) (accessory).
￭
Install insert in appliance box, device connection terminals must be at the bot-
tom.
￭
Attach the frame and the cover.
￭
Switch on mains voltage.
The load can be switched by briefly pressing the TEST button (1). LED (2)
lights up when the load is switched on.
Room thermostat insert
4 / 5
82400423
24.08.2022
J0082400423
